Air handling unit designed to meet the various mixing, filtration, heating, cooling, dehumidification, humidification, ventilation, recovery and sound attenuation needs in commercial, industrial and healthcare applications. Available as a horizontal unit for indoor installation or outdoor installation with canopy and protective accessories. Every model in the range may be ordered as single or dual path.
Description:
- Double-skin casing with 50 mm long-fibre mineral wool insulation reinforced with bonded glass fibre cloth, peripheral frame or stainless steel support legs depending on size, two-tone galvanised steel twin-wall panels, smooth internal walls without protruding screws as required by EN 13053.
- At least one removable panel per functional section as required by EN 13053, standard access panel on functional sections requiring maintenance.
- Filter efficiency: G4, F6 to F9, H10 to H14 or activated carbon.
- International dimensions.
- Filter mounted on compressible runners. Stainless steel universal or large-media frame with pressure tappings on each filtration stage. Filter class F9 in accordance with EN 13053.
- Lift-off doors on offset hinges, twist-lock latches made of composite materials, polyamide handles, large square inspection window as required by EN 13053.
- Sloped stainless steel condensate drain pan as required by EN 13053.
- Hot-water or cold-water coils with standard threaded connections (up to 3") and airtight sealing flanges, thermal break between casing and tubes, electric heater.
- Motor mounted on self-guided bracket, with belt idler, three types of fan (LP, MP and plug), mounted on anti-vibration frame, flexible internal connection sleeve between fan and casing.
- Fitted with cable gland for electrical power supply.
- Adiabatic or steam humidifier.
- Damper, single air intake, two-way mixing, three-way economiser, opposing blades, leakage class of dampers ensured by gaskets at the ends of the louvres and a continuous gasket along the side.
- Heat recovery unit with exchange coils, plates, heat pipe or wheel, sound attenuator.
- The AIRTECH range meets the requirements of European standards EN 1886 and EN 13053 and is manufactured at CIAT’s ISO 9001 certified facilities.
Advantages:
- Designed in accordance with EN 13053 and EN 1886: T2 thermal transmittance, TB2 thermal bridging, 2A mechanical strength, B casing leakage, F9 filter bypass leakage. Meets fan mechanical safety requirement. EUROVENT certified. Manufactured in ISO 9001 certified facilities. Screws do not protrude from internal walls
- Complete range with a wide spectrum of flow rates and many options
- Double-skin galvanised steel panels, two-tone coating, class B air leakage, with optional polyurethane or epoxy coating on outside and inside
- Two cell sizes with international dimensions.
- Usable throughout the range
- Airtight rubber flanges on hydraulic connection ports
- Handles made of glass fibre-reinforced polyamide with twist-lock latches (temperature range: -40°C to +80°C). Hinged door on offset hinges or lift-off door
- Compressible rails on counterframe with peripheral gasket ensure maximum prefiltration integrity, high-efficiency unit filtration, double leakage barrier, separated panels
- Sloped condensate drain pan
- Motor mounted on self-aligned bracket, with belt idler, fan motor assembly on spring-loaded supports
- Easy maintenance: upstream and downstream pressure tappings and easy access (coils, droplet eliminator, fan motor assemblies, etc.)
- Efficiency, air quality and optimum comfort
CLIMACIAT Concept, five complementary ranges to cover all centralised air treatment markets, from small volumes (shops, offices, etc.) to large-scale projects (business centres, hotel complexes, airports, industry, etc.), pure optimisation to ensure your project's success.
CLIMACIAT Concept goes further than the most quality standards and offer also Ultra-clean.
